We build conveyor systems for numerous different products, but some of the most interesting conveyor designs come into play when we are just handling boxes. Most industries handle boxes at some point or another, and moving them around can demand some inventive maneuvers in certain plants.
In any given plant, you will find obstructions like pillars, walls, and other mechanical systems that a box conveyor might have to navigate around. This takes thinking outside of the box (no pun intended) and implementing different kinds of belting, structures, and mechanisms.
A common solution to this problem is to use multiple conveyors that run perpendicular to one another to go around obstacles. This is a fairly simple solution, but you are limited to 90 degree turns in between conveyors.
If that doesn’t sound like an elegant enough solution, there is always the possibility of using a radius conveyor. A radius conveyor uses special modular belting which allows it to curve around the desired angle. This offers a much smoother turn, and it offers the possibility of turning a variety of angles. It is easier to make a 180 degree turn in smaller space using the previous method, but we have been able to minimize the radius to a point where it can make relatively sharp turns. It’s possible that these turns change the orientation of your product in a way that interferes with a labeling process, but there are ways to deal with that as well.
You can use a roller wheel for 90 degree rotations. When a box contacts one of these wheels, the leading edge is held against it by the conveyor flow and the box spins around it until it has made a 90 degree turn. At that point, the conveyor naturally pulls the box away from the roller. In order to use a multiple conveyor system and retain product orientation while transferring between conveyors, you might need something like a speedup roller at the end of each conveyor. This would “grab” the box and launch it onto the next conveyor. Without it, the box would be pulled in two different directions at the transition, causing it to turn and alter with orientation.
If subtle orientation adjustments are needed after a conveyor transition, you can use angled roller belting and a guard rail. Angled roller belting can push a box diagonally on the conveyor. If you use this to drive the box towards a guide rail, it will straighten itself out once it makes contact with the side. Sometimes, you might even want to add small rollers to the guide rail to prevent friction between it and the box.
With conveyor systems, there are often many ways to reach one solution, but there are often ways that fit certain plants better than others. Regardless, even in a complex space, there is likely a way to solve your box handling woes.
Learn more about Box Conveyor Systems
One of the biggest dilemmas in modern industry is the desire to speed everything up to match ambitions, but it often doesn’t turn out that easy. There are usually a number of technological limitations and roadblocks to get by.
This is a difficulty when conveyor systems are involved because the assumption that turning the belt speed or the VFD (variable-frequency drive) up will make everything work faster immediately, but this is often a mistake. While a VFD on a conveyor can essentially speed the conveyor up, the software might be set for dealing with the previous speed, causing the quality of your data to go downhill.
Even if you manage to adapt the programming yourself, there is still a danger that the system isn’t physically capable of handling what you want it to. Motors are usually chosen for the initial speed with some head room for a speed up in the future, but pushing them too hard would put a lot of stress on the system.
We do a lot of work in speeding up plants on systems of all sorts. Rather than just turning up the speeds on your conveyors, it is best to get in touch with someone who knows how the whole system works. If the system has the physical capability to run faster, there might be an entirely different problem keeping the system from its maximum potential.
On the software side of things, our programming team can take the desired speeds in a plant and provide an upgrade that will make a more optimized match. This will often allow you to have a similar accuracy with a higher speed.
There are certain things that can’t just be sped-up without some work as well. A labeling system, for example, is limited by print and application speeds. Speeding this system up would most likely require more labelers and more space to work with. Similarly, conveyor scales require a reasonable averaging time to achieve best results, so speeding them up might sacrifice your accuracy if the conveyor scale was not long enough in the first place.
We provide service on systems and will help you get the most out of them. If you would like us to take a look at your plant to see if we can get more throughput on the system, don’t hesitate to get in contact.
A customer came to us needing to automatically weigh bagged product in a production line, but there was an unusual problem. As the product left the conveyor scale, it needed to immediately travel on an incline conveyor to get to an upper level. The frame for that incline conveyor needed to extend beneath the conveyor scale, leaving no room under the conveyor for the scale components.
We solved this problem by designing a suspended scale that we installed above the conveyor portion of the system. By placing the weighing platform above the conveyor, the customer was able to re-use his existing incline conveyor.
But, there was one other problem. This customer required three feet of clearance between the conveyor belt and the suspended scale. That kind of space meant that the scale would swing in one direction, let’s say north and south, and sway in the other direction, let’s call that east and west.
The solution to this challenge was the placing of bracing bars on the frame beneath the conveyor bed, perpendicular to the direction of belt travel, and to attach triangular gussets near the top of the frame structure.
Those measures completely stabilized the conveyor scale system and allowed those bagged products to be weighed in motion to a sensitivity of less than one ounce.
A heavy capacity suspended weighing platform conveyor scale with extraordinary clearance…another example of our customization that fits your needs, your speeds, and your space.
Box Conveyor Systems That Give You The Best Cost of Ownership!
A box conveyor system is an inexpensive, versatile conveyor used in many different applications. They help reduce labor cost by efficiently moving boxes throughout the plant.
Speed is an important factor in manufacturing today. Effective box conveyor systems can reduce handling time and human errors, saving you money on the costs associated with human resources.
Here, a box conveyor system is being used in a pack-off room by utilizing traffic cops, 180º turns, box indexers, conveyor scales, box scanners, box labeling, and diverts – all working together to weigh, label, sort, and deliver the boxes to the proper palletizing station.
Box conveyors can be designed with an incline or decline to move boxes over exiting conveyors or to other levels in your plant. They are a cost effective way of moving product throughout your plant without having to redesign exiting lines.
Radius-turn box conveyors are a good solution to moving boxes in confined space, eliminating the need to redesign the plant.
Turning devices are used to insure that your boxes are positioned properly to enter the next station, (example turned to face the correct direction so a label can be applied properly to the box).
Regardless of your need, a box conveyor system can help eliminate many of the hassles of moving your product around the plant. A well designed box conveyor system will save you money and reduce the errors of manually handling boxes.
Learn more about Box Conveyors.